Инструкция для Canon imagePROGRAF iPF830

Handling sheets

Loading Sheets in the Printer .......................................................................................................................... 369

Changing the Type of Paper ........................................................................................................................... 350

Printing From a Desired Starting Point ............................................................................................................ 371

Removing Sheets ........................................................................................................................................... 373

➔

Clearing a Jammed Sheet ........................................................................................................................ 622

Loading Sheets in the Printer

Follow these steps to load sheets in the printer.
The Stacker cannot be used for cut sheets. If the Stacker is installed on the printer, first remove the Stacker from
the printer. (See "

Installing and Removing the Stacker On the Printer.")

➔

P.376

Important

•

Paper that is wrinkled or warped may jam. If necessary, straighten the paper and reload it.

•

Load the paper straight. Loading paper askew will cause an error. (See "

Paper loaded askew..")

➔

P.660

•

If you are using cut sheets of length 860 mm (33.9 in) or more, the loaded cut sheets may touch the floor, causing
soiling and scratching of the paper. If this happens, place a clean cloth or paper on the floor so that the cut sheets
do not touch the floor directly.

Note

•

Before loading sheets, make sure the printer is clean inside the Top Cover and around the Ejection Guide. If these
areas are dirty, we recommend cleaning them in advance. (See "

Cleaning Inside the Top Cover.")

➔

P.599

•

Store unused paper in the original package, away from high temperature, humidity, and direct sunlight.

Select sheets as the paper source.

•

If a print job was received
Sheets are automatically selected, and the media type and size specified by the print job are shown on
the Display Screen.
Press ▲ or ▼ to select Load Paper, and then press the OK button.

•

If no print job was received

Press the Load button.

Press ▲ or ▼ to select Cut Sheet, and then press the OK button.

Note

•

If any paper has been advanced that will not be used, a message is shown requesting you to remove it.
Press ▲ or ▼ to select Yes, and then press the OK button. Remove the paper and go to the next step.

iPF850

Loading Sheets in the Printer

User's Guide

Handling and Use of Paper

Handling sheets

369