Инструкция для Canon imagePROGRAF iPF830
7
Using the back of the Cleaning Brush, move the Switch to the side opposite ●, corresponding to the size of
the paper for printing.
In this case, note that you will move the switch in the opposite direction from the direction in step 4.
the paper for printing.
In this case, note that you will move the switch in the opposite direction from the direction in step 4.
Note
•
The Switch only moves number 1 and the number that
matches the paper size. Set all of the switches where
the number does not match the paper size in switches
number 2 and higher to the ● side.
matches the paper size. Set all of the switches where
the number does not match the paper size in switches
number 2 and higher to the ● side.
8
Close the Top Cover.
9
Install the Stacker on the printer.
(See "
(See "
The contrast becomes uneven during printing
The contrast becomes uneven during printing
Cause
Corrective Action
The paper feed amount is out of adjustment.
Adjust the feed amount.
(See "
(See "
The type of paper specified in the printer driv-
er does not match the type loaded in the
printer.
er does not match the type loaded in the
printer.
Load paper of the same type as you have specified in the printer driver.
(See "
(See "
Make sure the same type of paper is specified in the printer driver as you have loa-
ded in the printer.
ded in the printer.
1.
Press the Stop button and stop printing.
2.
Change the type of paper in the printer driver and try printing again.
The length of printed images is inaccurate in the feeding direction
The length of printed images is inaccurate in the feeding direction
Cause
Corrective Action
In the Control Panel menu, Adj. Priority is set
to Print Quality.
to Print Quality.
If Adjust Length is executed with the Stacker
installed on the printer, adjustment is not per-
formed correctly.
installed on the printer, adjustment is not per-
formed correctly.
Remove the Stacker from the printer and execute Adjust Length.
(See "
(See "
The type of paper specified in the printer driver
does not match the type loaded in the printer.
does not match the type loaded in the printer.
Load paper of the same type as you have specified in the printer driver.
(See "
(See "
The contrast becomes uneven during printing
iPF850
Troubleshooting
Problems with the printing quality
640