Инструкция для Canon imagePROGRAF iPF830
This paper cannot be used as size is not supported.
This paper cannot be used as size is not supported.
Cause
Corrective Action
Paper that is too large for the printer has been loa-
ded.
ded.
Lift the Release Lever and load paper of the correct size.
(See "
(See "
Paper that is too small for the printer has been
loaded.
loaded.
Lift the Release Lever and load paper of the correct size.
(See "
(See "
Paper has been loaded that is too small to print
the test pattern for printhead adjustment or nozzle
checking.
the test pattern for printhead adjustment or nozzle
checking.
Lift the Release Lever and load unused paper A4/Letter (vertical) or larger.
More than one sheet may be required depending on the adjustment.
More than one sheet may be required depending on the adjustment.
Cannot print as selected. Another roll is in use.
Cannot print as selected. Another roll is in use.
Cause
Corrective Action
A printed document remains in the Output Tray without being cut and a
print job was received that specifies the other roll.
print job was received that specifies the other roll.
Load the other roll and resend the print job.
(See "
(See "
Roll printing is selected.
Roll printing is selected.
Cause
Corrective Action
You have attempted to print on a roll,
but no roll is loaded.
but no roll is loaded.
Press ▲ or ▼ to select "Load Roll Paper", and then press the OK button. Load the roll,
and then print.
(See "
and then print.
(See "
Press ▲ or ▼ and select Stop Printing or press the Stop button to stop printing.
Roll printing is selected, but sheets are loaded.
Roll printing is selected, but sheets are loaded.
Cause
Corrective Action
A print job for rolls was received when a
sheet is loaded.
sheet is loaded.
Follow these steps to load and print on a roll.
1.
Press ▲ or ▼ to select Eject Cut Sheet, press the OK button, and remove the sheet.
(See "
(See "
2.
Load a new roll.
(See "
(See "
The printer now starts printing the print job.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
Roll x is selected. (x is 1 (Upper) or 2 (Lower))
Roll x is selected. (x is 1 (Upper) or 2 (Lower))
Cause
Corrective Action
The indicated roll is specified for a print job sent
from a computer, but that roll is not loaded.
from a computer, but that roll is not loaded.
Press ▲ or ▼ to select "Load Roll Paper", and then press the OK button.
Load the roll, and then print.
(See "
Load the roll, and then print.
(See "
Press ▲ or ▼ and select Stop Printing or press the Stop button to stop
printing.
printing.
iPF850
This paper cannot be used as size is not supported.
Error Message
Messages regarding paper
657