Инструкция для Canon imagePROGRAF iPF830

This topic describes how to print borderlessly at actual size based on the following example.

Important

When borderless printing is used, the edge of the paper is cut during printing. Thus, ink density may be uneven at
the edges. If you require higher image quality, select No from the Automatic Cutting list in the Roll Paper Op-
tions dialog box. In this case, the paper can be printed without borders on the left and right sides only. Once
printed and cut, please cut the upper and lower bands with scissors.

Document: Any type

Page size: 10×12 inches (254.0×304.8 mm)

Paper: Roll

Paper type: Canon Glossy Photo Paper 170gsm

Roll paper width: 10 inches (254.0 mm)

Create the original in the source application 3 mm (0.12 in) larger on each side than 254.0×304.8 mm (10 ×
12 in) —that is, 260.0×310.8 mm (10.2 × 12.2 in)

Note

If you can specify the margin, as in Microsoft Word, set the margin at 0 mm. For instructions on specifying
the margin, refer to the software documentation.

The extra 3 mm (0.12 in) on each side will not be printed. Create the original so that it fits inside the paper
area to be printed on.

Choose Print in the application menu.

 

Make sure the Main sheet is displayed.

In the 

Media Type list, select the type of paper that is loaded. In this case, click Canon Glossy Photo

Paper 170gsm.

 

Borderless Printing at Actual Size (Windows)

                                                                                                                                                           

iPF850

                                                                                                                                                                                                                     

Enhanced Printing Options

Printing at full size

 

88