Инструкция для Canon imagePROGRAF iPF8400

The printer stops during a print job

The printer stops during a print job

Cause

Corrective Action

An error message is displayed during printing.

Check the error message and take action as necessary.

The last portion of roll paper was used during a print job, and paper could
not be advanced because the trailing edge is taped to the roll.

Remove the used roll and insert a new roll.

 (See "Removing the Roll Holder from Rolls.")

 (See "Loading and Printing on Rolls.")

Cause

Corrective Action

The leading edge of the roll paper was
cut to straighten it.

The leading edge of rolls may be cut to straighten it if Trim Edge First is set to a value other
than Off in the Control Panel menu.

 (See "Cutting the Leading Edge of Roll Paper Automatically.")

The Printhead nozzles are clogged.

Print a test pattern to check the nozzles and make sure the Printhead is in good condition for
printing.

 (See "Checking for Nozzle Clogging.")

A print job was received from an in-
compatible printer driver.

Use the correct imagePROGRAF printer driver for the printer and try printing again.

The printer is damaged.

Contact your Canon dealer for assistance.

An error message is shown on the Display Screen

                                                                                                                                                     

iPF8400

                                                                                                                                                                                                                                  

Troubleshooting

The printer stops during a print job

 

112