Инструкция для Canon imagePROGRAF iPF8400
Problems with the printing quality
Problems with the printing quality
Printing is faint
Printing is faint
Cause
Corrective Action
You may be printing on the wrong side
of the paper.
of the paper.
Print on the printing surface.
The Printhead nozzles are clogged.
Print a test pattern to check the nozzles and see if they are clogged.
(See "Checking for Nozzle Clogging.")
→
User's Guide
Because the printer was left without ink
tanks installed for some time, ink has
become clogged in the ink supply sys-
tem.
tanks installed for some time, ink has
become clogged in the ink supply sys-
tem.
After the ink tanks have been installed for 24 hours, run Head Cleaning B from the Control
Panel.
Panel.
Paper is jammed inside the Top Cover.
Follow the steps below to remove the jammed piece of paper inside the Top Cover.
1.
Open the Top Cover and make sure the Carriage is not over the Platen.
2.
Remove any scraps of paper inside the Top Cover.
3.
Close the Top Cover.
The ink was not dry when paper was
cut.
cut.
Specify a longer drying period in the Control Panel menu, in Paper Details > Roll DryingTime.
(See "Menu Settings.")
→
User's Guide
Printing may be faint if Print Quality in
Advanced Settings in the printer driver
is set to Standard or Fast.
Advanced Settings in the printer driver
is set to Standard or Fast.
In Advanced Settings of the printer driver, choose Highest quality or High in Print Quality.
Printing in Fast or Standard mode is faster and consumes less ink than in Highest quality or
High modes, but the printing quality is lower.
Printing in Fast or Standard mode is faster and consumes less ink than in Highest quality or
High modes, but the printing quality is lower.
(See "Giving Priority to Particular Graphic Elements and Colors for Printing.")
→
User's Guide
You are printing on paper that tends to
generate dust when cut.
generate dust when cut.
In the Control Panel menu, set CutDustReduct. in Paper Details to On.
(See "Reducing Dust from Cutting Rolls.")
→
User's Guide
Paper rubs against the printhead
Paper rubs against the printhead
Cause
Corrective Action
The type of paper specified in the print-
er driver does not match the type loa-
ded in the printer.
er driver does not match the type loa-
ded in the printer.
Load paper of the same type as you have specified in the printer driver.
Make sure the same type of paper is specified in the printer driver as you have loaded in the
printer.
printer.
iPF8400
Printing is faint
Troubleshooting
Problems with the printing quality
113