Инструкция для Canon imagePROGRAF iPF850

HP-GL/2 problems

With HP-GL/2, printing is misaligned ............................................................................................................. 135

Lines or images are missing in printed HP-GL/2 jobs. ................................................................................... 135

Lines are printed too thick or thin in HP-GL/2 print jobs ................................................................................ 135

HP-GL/2 jobs are printed in monochrome (or color) ...................................................................................... 136

Printed colors of lines are inaccurate during HP-GL/2 printing ....................................................................... 136

HP-GL/2 jobs are printed 6 mm larger than specified .................................................................................... 136

HP-GL/2 jobs are printed at maximum size, even if a standard size is specified ............................................. 136

HP-GL/2 printing takes a long time ............................................................................................................... 136

The printer stops when printing a HP-GL/2 job (the carriage stops moving) ................................................... 136

With HP-GL/2, printing is misaligned

Cause

Corrective Action

The plotter origin is incorrect.

Check the printing commands.

Set Detect img size to Command priority or Detected size in the Control Panel
menu.

(See "Menu Settings.")

➔

User's Guide

The Margin setting in the Control Panel
menu is incorrect.

Adjust the Margin setting values in the Control Panel menu.

(See "Menu Settings.")

➔

User's Guide

Lines or images are missing in printed HP-GL/2 jobs.

Cause

Corrective Action

The memory is full.

Check the size of the data in the print job.

An HP-GL/2 command not supported by this printer
was received.

Check the print job and settings.

The printer has received print data that includes HP
RTL commands when Auto Rotate is On in the
Control Panel menu.

In the Control Panel, set Auto Rotate to Off and print again.

(See "Menu Settings.")

➔

User's Guide

The plotter origin is incorrect.

Set Detect img size to Command priority or Detected size in the Control
Panel menu.

(See "Menu Settings.")

➔

User's Guide

Oversize in the Control Panel menu is set to Off.

Set Oversize to On in the Control Panel menu.

(See "Menu Settings.")

➔

User's Guide

Lines are printed too thick or thin in HP-GL/2 print jobs

Cause

Corrective Action

The Width setting in the Control Panel
menu is incorrect.

Change the Width setting configured in Pen no. of the Palette A or Palette B selected
in the Control Panel menu.

(See "Menu Settings.")

➔

User's Guide

ThickenFineLines in the Control Panel
menu is set to Off.

If fine lines are printed faintly, setting ThickenFineLines to On will print the lines more
distinctly.

(See "Menu Settings.")

➔

User's Guide

The Ln wdth correct setting in the Con-
trol Panel menu is incorrect.

Change the Ln wdth correct setting in the Control Panel menu.

(See "Menu Settings.")

➔

User's Guide

iPF850 Series

With HP-GL/2, printing is misaligned

Basic Guide

Troubleshooting

HP-GL/2 problems

135