Инструкция для Canon imagePROGRAF iPF6400S

The Power Lamp and Message Lamp are not lit (even once), and nothing appears on the Display
Screen
Make sure the printer is plugged in correctly. Check the connection at the plug and electrical outlet.

Important

Starting the printer when it is connected via the USB cable to a Mac OS computer that is off may cause the computer
to start up at the same time. To prevent this, disconnect the USB cable before starting the printer. Connecting the
printer to the computer via a USB hub may solve this issue.

Turning the printer off

Important

Never disconnect the printer's power supply or unplug it during a print job. This may damage the printer.

 

Make sure no print jobs are in progress.
If the Message Lamp is flashing, check the message on the Display
Screen and take action as necessary. 

If the Data Lamp is flashing, the printer is receiving a print job. Turn
off the printer only after printing is finished.

 

Hold down the Power button for more than a second.

After "Shut Down.. Please Wait.." is shown on the Display Screen,
the printer shuts off.

These are the basic steps for loading and printing on rolls.
Follow these steps to load and print on rolls.

If you use the optional Stand, you can store printed documents in the Output Stacker. 

You also can install and use the printer on a table, etc., instead of using the Stand.

 

 

 

Loading and Printing on Rolls

                                                                                                                                                                                     

iPF6400S

                                                                                                                                                                                                                             

Basic Printing Workflow

Printing procedure

 

22