Инструкция для Canon imagePROGRAF iPF6400S
Important
•
Keeping a roll in the printer for a long time without printing on it may leave a depression on the leading edge.
When printing quality is most important, we recommend setting TrimEdge Reload to On or Automatic so that
the paper edge is automatically cut before printing.
When printing quality is most important, we recommend setting TrimEdge Reload to On or Automatic so that
the paper edge is automatically cut before printing.
•
Before printing banners or other long documents, tap the Output Stacker. We recommend that you spread a
clean cloth or paper on the floor and select Eject as the cutting method for rolls to prevent the printed surface
from becoming dirty or scratched.
clean cloth or paper on the floor and select Eject as the cutting method for rolls to prevent the printed surface
from becoming dirty or scratched.
Note
•
For details on supported sizes and types of rolls, see Paper Sizes or the Paper Reference Guide.
•
To wait until the ink dries after printing before cutting the roll, set Drying Time in the printer driver.
•
Once you have used all the paper on a roll, clean the platen. If the Platen inside the Top Cover becomes dirty, it
may soil the underside of paper.
may soil the underside of paper.
1
Turn the printer on.
2
Load the roll on the Roll Holder.
iPF6400S
Loading and Printing on Rolls
Basic Printing Workflow
Printing procedure
23