Инструкция для Canon imagePROGRAF iPF6400S

Adjusting the Printhead

Adjusting the Printhead

If printed documents are affected by the following problems, try adjusting the printhead.

Printing is faint or affected by banding in different colors
Execute Nozzle Check in the Control Panel menu to check for printhead nozzle clogging.
For instructions, 

Printed vertical lines are warped or colors are out of alignment
Execute Head Posi. Adj. in the Control Panel menu to adjust the printhead position.

Normally, execute Standard.

When printing on special paper, or if printing is not improved after Standard, try Manual.

Note

In the next case, execute Initial adjustmt.

If adjusting the printhead position has not been performed such as due to an error during initial setup

If Rep.P.head Print in the Control Panel menu is set to Off and adjusting the printhead position has not
been performed when replacing the printhead

Paper rubs against the printhead, or image edges are blurred
Selecting Head Height in the Control Panel menu and changing the printhead height may improve the situation.

If vertical lines in printed documents are warped or colors are out of alignment, execute Head Posi. Adj.. The printer
will print and read a test pattern, and the Printhead position will be adjusted automatically.
There are two modes for automatic Printhead adjustment: Standard and Simple.

Standard
Execute if vertical lines in printed material are warped or colors are out of alignment.
Furthermore, if Simple does not improve printing, try Standard.

Simple
Executes simple adjustment in a short time.
Execute this when frequently adjusting the printhead, such as during daily inspection.

Adjusting the Printhead

                                                                                                                                                                                              

iPF6400S

                                                                                                                                                                                                                             

Adjustments for Better Print Quality

Adjusting the Printhead

 

764