Инструкция для Canon PowerShot ELPH 190 IS Blue
151
ç
Contents
ç
Chapter Contents
Saving Images to a Connected Computer
Connect to your access point via Wi-Fi as follows.
Also refer to the access point user manual.
Confirming Access Point Compatibility
Confirm that the Wi-Fi router or base station conforms to the Wi-Fi
Connection methods vary depending on whether the access point
For non-WPS access points, check the following information.
•
Network name (SSID/ESSID)
The SSID or ESSID for the access point you use. Also called
The SSID or ESSID for the access point you use. Also called
the “access point name” or “network name”.
•
Network authentication / data encryption (encryption method /
encryption mode)
The method for encrypting data during wireless transmission.
The method for encrypting data during wireless transmission.
Check which security setting is used: WPA2-PSK (AES), WPA2-
PSK (TKIP), WPA-PSK (AES), WPA-PSK (TKIP), WEP (open
system authentication), or no security.
•
Password (encryption key / network key)
The key used when encrypting data during wireless
The key used when encrypting data during wireless
transmission. Also called the “encryption key” or “network key”.
•
Key index (transmit key)
The key set when WEP is used for network authentication / data
The key set when WEP is used for network authentication / data
encryption. Use “1” as the setting.
•
If system administrator status is needed to adjust network
settings, contact the system administrator for details.
•
These settings are very important for network security.
Exercise adequate caution when changing these settings.