Инструкция для Canon EOS 7D Mark II Wi-Fi Adapter Kit

453

8

3: Custom ControlsN

During metering, tilting <p> to the right will switch between the current 
AF point and the center AF point or registered AF point.

*4:On the setting screen, when you press the <B> button, you can select [Switch to 

center AF point] or [Switch to registered AF point]. To register the AF point, see 
page 450.

During metering, you can select an AF point directly with the <9> dial 
or <5> without pressing the <S> button. With the <5> dial, you can 
select a left or right AF point. (Looping sequence for Zone AF and Large 
Zone AF.)

*5:On the Multi-controller setting screen, when you press the <B> button, you can 

press the center of <9> to select [Switch to center AF point] or [Switch to 
registered AF point]. To register the AF point, see page 450.

During metering, you can turn the <5> dial to directly select an upper 
or lower AF point without pressing the <S> button. (Looping sequence 
for Zone AF and Large Zone AF.)

During metering, you can use <p> to directly select an AF area 
selection mode without pressing the <S> button.

: Selected AF pointzCenter/Registered AF point

If you change the aperture in <a> mode when [Direct AF point selection], 
[Direct AF pt select: Vertical], or [Set ISO speed (  during metering)] 
(p.455) is assigned to <5>, turn the <6> dial while holding down the 
<A> button.