Инструкция С Настройками для Olympus E-410

30 

EN

Shooting functions 

k

 Selecting the appropriate 

mode for shooting conditions

The camera sets the optimum aperture value and 
shutter speed automatically according to the subject 
brightness.
Set the mode dial to P.

• When the shutter button is half-pressed, the shutter 

speed and aperture value are displayed on the 
viewfinder. Releasing the shutter button displays the 
shutter speed and aperture value on the control panel 
screen.

P

In the P mode, the camera is programmed such that the aperture value and shutter speed 
are automatically selected according to the subject’s brightness as shown below. The 
program line diagram varies with the type of lens mounted.

%

By turning the control dial in the P mode, you can change the combination of aperture and 
shutter speed as illustrated above while maintaining the optimum exposure.
The program shift setting will not be canceled after shooting. To cancel program shift setting, 
turn the control dial so that the viewfinder’s or control panel screen’s exposure mode 
indication 

% changes to P or turn off the power. Program shift is not available when you are 

using a flash.

P: Program shooting

When using the 
14 - 42 mm f3.5 - 5.6 
zoom lens
(focal length: 14 mm)

Program shift

Control panel screen display

Viewfinder

Exposure mode

AF confirmation mark

Shutter speed

Aperture value

s0013_e_00_unified.book  Page 30  Monday, March 5, 2007  10:04 AM