Инструкция С Настройками для Olympus E-410

32 

EN

Shooting functions 

k

 Selecting the appropriate 

mode for shooting conditions

The camera sets the optimum aperture value automatically for the shutter speed you have 
selected. Set the shutter speed depending on the type of effect you want. A higher speed 
shutter allows you to capture a fast-moving subject without blur, and a slower shutter speed 
blurs a moving subject, creating a feeling of speed or motion.

Set the mode dial to S and turn the 
control dial to set the shutter speed.

J The possibility of camera shake spoiling your picture increases greatly during macro or ultra-

telephoto shooting. Raise the shutter speed or use a monopod or tripod to stabilize the camera.

J If the aperture value indication at the maximum value is blinking, set the ISO sensitivity to a lower 

value or use a commercially available ND filter (for adjusting the amount of light). 

g “ISO k 

Setting the desired sensitivity to light” (P. 54)

J If the aperture value indication at the minimum value is blinking, set the ISO sensitivity to a higher 

value. 

g “ISO k Setting the desired sensitivity to light” (P. 54)

S: Shutter priority shooting

• If the aperture value indication at the minimum 

value is blinking*, the correct exposure has not 
been attained (underexposed). Lower the 
shutter speed.

• If the aperture value indication at the maximum 

value is blinking*, the correct exposure has not 
been attained (overexposed). Raise the shutter 
speed.

* The aperture value at the moment when its indication blinks varies with the lens type and focal 

length of the lens.

A fast shutter 
speed can freeze 
a fast action 
scene without any 
blur.

A slow shutter 
speed will blur a 
fast action scene. 
This blurring will 
give the 
impression of 
dynamic motion.

Slower shutter speed

Faster shutter speed

Viewfinder

Shutter speed

Aperture value

AF confirmation

mark

Exposure mode

s0013_e_00_unified.book  Page 32  Monday, March 5, 2007  10:04 AM