Справочник Пользователя для Netgear WNA1000M - Wireless-N 150 USB Adapter

Click Next. The Smart Wizard software detects the adapter. 

Follow the onscreen prompts to install the driver and complete the installation.

How you connect to a network depends on what you selected during custom installation. 

If you installed the Smart Wizard with automatic configuration, see the following 

If you installed the Smart Wizard with manual configuration, the Settings tab displays. 
See 

To use a Windows utility, see your Windows documentation or the NETGEAR 

application note at 

Using the Smart Wizard to Connect to a Wireless Network

After the software is installed, you are prompted to connect to a wireless network.

One of the following screens displays:

: A network in your area supports Push 'N' Connect (also called WPS). 

Click Next, and follow the prompts to push the WPS button on your adapter and on 
your router. Then connect without entering a password.

: Select a wireless network from the list and click Next. To connect 

to a secure network, you must enter its passphrase or network key.