Справочник Пользователя для Netgear WNA1000M - Wireless-N 150 USB Adapter
18
|
Chapter 2: Network Connections and Wireless Security
N150 Wireless Micro USB Adapter WNA1000M
•
Channel
. The channel determines which operating frequency is used. In this column
(G) indicates a 2.4 GHz network.
•
N
. The access point supports wireless N mode.
•
WPS
. The access point supports WPS.
•
Security
. Identifies whether the wireless network uses security settings such as
WPA2-PSK, WPA-PSK, or WEP.
•
Signal
. Identifies the signal strength of the communications.
•
MAC Address
. Identifies the hardware address (MAC address) of the wireless device
broadcasting this information.
•
Mode
. Identifies the type of wireless network — Access Point (Infrastructure) or
Computer-to-Computer (Ad Hoc)
The buttons located at the bottom of the Networks tab are:
•
Help
. Display online help.
•
Join a Network
18.
•
Connect
. Connect to the network that you selected.
•
Scan
. Check for wireless networks. Clicking Scan refreshes the screen.
•
Close
. Close the window of the Wizard.
Joining a Network without WPS
1.
Use the
icon to open the Smart Wizard. On the status bar at the bottom of the
screen, click Join a Network.
If there is a WPS network in your area, the Smart Wizard displays the WPS screen. To
bypass WPS, select No to avoid connecting, and then click Next.
bypass WPS, select No to avoid connecting, and then click Next.
2.
Select a network from the drop-down list. If
you select a hidden network, you must enter
the SSID. Click Next.
hidden network
3.
Follow the wizard steps to specify the
wireless security if used, and to create a
profile.
4.
Review you settings, and click Finish.
The status bar shows the status of your
wireless connection.
wireless connection.