Использование И Уход для KitchenAid 19 Cu. Ft. Standard-Depth Bottom-Freezer Refrigerator, Architect® Series II

Скачать
Страница из 60
11
Temp Alarm
The Temp Alarm feature provides temperature information in the 
event of a power outage.
Power outage: During a power outage, if the temperatures in the 
refrigerator and freezer compartments exceed normal operating 
temperatures, the highest temperature reached will be displayed.
Press the Temp Alarm touch pad until the indicator light is lit, 
to turn on this feature. Press and hold Temp Alarm for 
3 seconds until the indicator light goes off to turn off this 
feature. 
Temperature alarm: An alarm will sound repeatedly if the freezer 
or refrigerator compartment temperatures exceed normal 
operating temperatures for an hour or more.
The temperature displays will alternately show the current 
temperatures and the highest temperatures the compartments 
reached. 
Press the Temp Alarm touch pad once to stop the audible 
alarm and alternating temperature displays. The Temp Alarm 
light will continue to flash until the refrigerator returns to the 
set temperature.
Door Alarm
The Door Alarm feature sounds a chime every few seconds when 
the refrigerator door has been left open for 5 continuous minutes. 
The chime will sound until the door is closed or Door Alarm is 
turned off.
Press the Door Alarm touch pad to turn this feature on or off. 
The indicator light will be lit when the Door Alarm feature is on. 
Max Cool
The Max Cool feature assists with periods of high refrigerator use, 
full grocery loads, or temporarily warm room temperatures.
Press Max Cool to set the freezer and refrigerator to the 
lowest temperature settings. Press Max Cool again to return 
to the normal refrigerator set point.
NOTE: The Max Cool feature will automatically shut off in 
approximately 12 hours.
Filter Reset
The Filter Reset control allows you to restart the water filter status 
tracking feature each time you replace your water filter. See 
“Water Filtration System.”
Press and hold the Filter Reset touch pad for 3 seconds,  until 
the Order or Replace light turns off. 
User Preferences
The control center allows you to set user preferences, if desired. 
Temperature Display (F_C)
This preference allows you to change the temperature display.
F - Temperature in degrees Fahrenheit
C - Temperature in degrees Celsius 
Alarm (AL)
This preference allows you to turn off the sound of all alarms.
ON - You will hear the alarm sound.
OFF - You will not hear the alarm sound. 
To Access the User Preferences Menu:
1. Press and hold the Door Alarm touch pad for 3 seconds. The 
preference name will appear in the Freezer display and the 
preference status (F or C) or (ON or OFF) will appear in the 
Refrigerator display.
2. Use the Freezer (+) or (-) touch pads to scroll through the 
preference names. When the desired preference name is 
displayed, press the Refrigerator (+) or (-) touch pads to 
change the preference status.
3. Set your preferences by pressing and holding the Door Alarm 
touch pad for 3 seconds, or by shutting the refrigerator 
compartment door. 
Crisper Humidity Control 
You can control the amount of humidity in the moisture-sealed 
crisper. Depending on your model, adjust the control to any 
setting between FRUIT and VEGETABLES or LOW and HIGH.
FRUIT/LOW (open) for best storage of fruits and vegetables with 
skins. 
VEGETABLES/HIGH (closed) for best storage of fresh, leafy 
vegetables. 
Ice Maker 
IMPORTANT: Flush the water system before turning on the ice 
maker. See “Water Dispenser.” 
Turning the Ice Maker On/Off
To turn the ice maker ON, simply lower the wire shutoff arm.
To manually turn the ice maker OFF, lift the wire shutoff arm to the 
OFF (arm up) position and listen for the click.
NOTE: Your ice maker has an automatic shutoff. As ice is made, 
the ice cubes will fill the ice storage bin and the ice cubes will 
raise the wire shutoff arm to the OFF (arm up) position. Do not 
force the wire shutoff arm up or down.
NOTE: Turn off the ice maker before removing the ice storage bin 
to serve ice or to clean the bin. This will keep the ice cubes from 
dropping out of the ice maker and into the freezer compartment. 
After replacing the ice storage bin, turn on the ice maker.