Использование И Уход для KitchenAid KXW9748YSS

Make Electrical Power Supply 

Connection to Range Hood

1.  Disconnect power.
2.  Locate terminal box on top of the range hood.

3.  Use UL listed wire connectors and connect black 

wires (B) together.

4.  Use UL listed wire connectors and connect white 

wires (A) together.

NOTE: When using an in-line blower motor system, the green 

(or green/yellow) ground wire in the conduit from the in-line 

blower motor system is to be connected with the green (or bare) 

wire of the home power supply cable and with the green/yellow 

wire (D) in the terminal box.
5.  Connect green (or bare) ground wire from home power 

supply to the green/yellow ground wire (D) in terminal 

box using UL listed wire connectors.

6.  Install terminal box cover.
7.  Check that all light bulbs are secure in their sockets.
8.  Reconnect power.

Install Chimney Covers

1.  If it is not already installed, install damper on top of the 

exhaust opening. Check that the damper opens freely.

2.  Connect the vent system and seal all connections 

with clamps.

1.  Slightly spread the sides of the cover apart and hook them 

behind the chimney mounting brackets.

2.  Attach the cover to the brackets with 2 flat head screws.
3.  Securely tighten screws.