Листовка для Xerox Phaser 1235
Advanced Features and Troubleshooting Manual
109
Using Printer Options
4
Align the pin connectors on the Token Ring Card
with the receptacle on the controller board and
insert the card so that it fits into the optional
interface slot.
with the receptacle on the controller board and
insert the card so that it fits into the optional
interface slot.
5
Secure the Token Ring Card to the controller board
with the screws removed in Step 3.
with the screws removed in Step 3.
6
Align the controller board with the printer’s guide
channel and slide the board all the way into the
printer until it stops. Then replace the screws to
secure the controller board.
channel and slide the board all the way into the
printer until it stops. Then replace the screws to
secure the controller board.
7
Reconnect the power cord and all cables and turn on
the printer.
the printer.
8
Print a Configuration Sheet (as described on
page 45) and confirm that the Token Ring Card
appears as an installed option. If any problems
occur, reinstall the card. If problems persist, check
the support links at
www.xerox.com/officeprinting/1235support for
assistance.
page 45) and confirm that the Token Ring Card
appears as an installed option. If any problems
occur, reinstall the card. If problems persist, check
the support links at
www.xerox.com/officeprinting/1235support for
assistance.