Листовка для Xerox Phaser 1235
Advanced Features and Troubleshooting Manual
111
Using Printer Options
4
Insert the memory into the slot.
Note
256- Mbyte DIMMs must be used alone or
as a pair with another 256- Mbyte DIMM.
They cannot be used in combination with
any other size of memory. Other sizes of
memory can be paired. The maximum
amount of memory the Phaser 1235 Color
Printer can support is 512 Mbytes.
as a pair with another 256- Mbyte DIMM.
They cannot be used in combination with
any other size of memory. Other sizes of
memory can be paired. The maximum
amount of memory the Phaser 1235 Color
Printer can support is 512 Mbytes.
5
Secure the memory to the controller board with the
clips.
clips.
6
Align the controller board with the printer’s guide
channel and slide the board all the way into the
printer until it stops. Then replace the screws to
secure the controller board.
channel and slide the board all the way into the
printer until it stops. Then replace the screws to
secure the controller board.
7
Reconnect the power cord and all cables and turn on
the printer.
the printer.
8
Print a Configuration Sheet (as described on
page 45) and confirm that the total memory is
correct. If any problems occur, reinstall the memory.
If problems persist, check the support links at
page 45) and confirm that the total memory is
correct. If any problems occur, reinstall the memory.
If problems persist, check the support links at
www.xerox.com/officeprinting/1235support for
assistance.
assistance.