Листовка для Xerox SmartSend Support & Software

Note: This value is not required for other types of LDAP servers and may cause them to
fail to return user records. Also, depending on server setup, a different filter string may
be required.

When configuring the SMARTsend LDAP settings:

1. At the E-mail and Address Book Setup page (Figure 1), enter a valid LDAP host name (e.g.

v-sundir)

Figure 1

2. Enter colon port number after the host name (e.g. v-sundir:389)

3. Enter a forward slash and base (e.g. v-sundir:389/o=Test_Domain)

4. Enter valid LDAP property mappings.

5. Select Apply button and then select Test to verify success.

Note: Short host names may or may not work so please use the full host name (e.g. v-
sundir.domain.com).

How do I create a scan directory that can be used by the SMARTsend
Scan to Home Utility to scan to an FTP home location?

Option 1: Create the scan directory inside the FTP root directory.

Note: The following sample procedure is based on a Windows 2000 server.
1. Open

Windows Explorer on the computer or server that will be the “scan server.”

2. Create a directory inside of the last directory of the FTP root path (the ftp root path in this

example is c:\inetpub\ftproot).

3. Right-click

the

ftproot directory (or the last directory in the FTP root path that the scan server

was just created in) and select Sharing (Figure 1). The folder Properties dialog will appear.