Руководство Пользователя для Xerox DocuColor 12 Printer with Splash G630
Editing Custom Color Profiles (Expert Mode)
84
Splash G630 User Guide
Editing Curve Gains
1.
Select a color profile to edit from the Color pro-
file popup menu.
2.
Select Highlights, Midtones, or Shadows at the
bottom of the window to adjust a portion of the curve,
or Overall to adjust the entire curve.
or Overall to adjust the entire curve.
3.
Select a color curve to edit from the floating color
curve palette. The four color curves and the Master
curve are selectable.
curve are selectable.
4.
Move the slider to adjust the gain.
5.
Repeat Step 3 and Step 4 until all adjustments to
all curves are complete. Each color’s cumulative
changes show in its own channel and in the master
channel display.
changes show in its own channel and in the master
channel display.
6.
Select Save to overwrite the existing profile or
Save As… to create a new profile.
•
The Save option is disabled when factory profiles
are selected because factory profiles are not editable.
•
When using Save As…, enter a profile name for
the new profile and then click Save.
•
The new profile name appears in the list of color
profiles in the Set Active Profile dialog box. Note that
the new profile is automatically calibrated to the last
time calibration was run as it is created.
the new profile is automatically calibrated to the last
time calibration was run as it is created.
7.
Select OK. Selecting OK before saving a profile
causes ColorCal to prompt to save changes or cancel.
The new profile is automatically calibrated to the last
time calibration was run as it is created.
The new profile is automatically calibrated to the last
time calibration was run as it is created.
Control Point Editing
1.
Select a color profile to edit from the color profile
popup menu.
2.
Select a color curve to edit from the floating
CMYK color curve palette. If the Master curve is
selected, the Edit Control Points button is disabled.
selected, the Edit Control Points button is disabled.
3.
Select the Edit Control Points button.
4.
To edit, drag the curve points with the mouse
pointer. Output Percentage (0% to 100%) and Input
Percentage (0% to 100%) update instantly on the right
as a curve point is moved.
Percentage (0% to 100%) update instantly on the right
as a curve point is moved.
•
To add a curve point, click anywhere along the
curve. ColorCal allows a maximum of 32 control
points for an individual color curve.
points for an individual color curve.
•
To remove a curve point, drag it over another
point on the color curve.
•
A single level of Undo is supported which
removes the last change to a control point.
•
To undo all changes to the curve, click Revert.
5.
Select Save to overwrite the existing profile or
Save As… to create a new profile.
•
The Save option is disabled when factory profiles
are selected because factory profiles are not editable.
•
When using Save As…, enter a profile name for
the new profile and then click Save.
•
The new profile name appears in the list of color
profiles in the Set Active Profile dialog box. Note that
the new profile is automatically calibrated to the last
time calibration was run as it is created.
the new profile is automatically calibrated to the last
time calibration was run as it is created.
6.
Select OK. ColorCal prompts to save changes or
cancel if OK is selected before saving a profile. Note
that the new profile is automatically calibrated to the
last time calibration was run as it is created.
that the new profile is automatically calibrated to the
last time calibration was run as it is created.
Note!
Factory installed profiles cannot
be edited. ColorCal automatically
prompts to save with a new name
any factory installed profile
selected.
be edited. ColorCal automatically
prompts to save with a new name
any factory installed profile
selected.
Note!
A single level of Undo is
supported which removes the last
change applied. The Revert
button restores the profile to the
last saved state.
supported which removes the last
change applied. The Revert
button restores the profile to the
last saved state.
Note!
Factory installed profiles cannot
be edited. ColorCal automatically
prompts to save with a new name
any factory installed profile
selected.
be edited. ColorCal automatically
prompts to save with a new name
any factory installed profile
selected.
Note!
The color curves created with the
Expert Edit controls are similar to
those used in Adobe Photoshop,
but cannot be directly exchanged
with curves created in Adobe
Photoshop.
Expert Edit controls are similar to
those used in Adobe Photoshop,
but cannot be directly exchanged
with curves created in Adobe
Photoshop.