Xerox DocuColor 12 Printer with Splash G630 用户指南

Editing Custom Color Profiles (Expert Mode)

Splash G630 User Guide 

Select a color profile to edit from the Color pro-

file popup menu.

Select Highlights, Midtones, or Shadows at the 

bottom of the window to adjust a portion of the curve, 
or Overall to adjust the entire curve.

Select a color curve to edit from the floating color 

curve palette. The four color curves and the Master 
curve are selectable.

Move the slider to adjust the gain.

Repeat Step 3 and Step 4 until all adjustments to 

all curves are complete. Each color’s cumulative 
changes show in its own channel and in the master 
channel display.

Select Save to overwrite the existing profile or 

Save As… to create a new profile.

•

The Save option is disabled when factory profiles 

are selected because factory profiles are not editable.

•

When using Save As…, enter a profile name for 

the new profile and then click Save.

•

The new profile name appears in the list of color 

profiles in the Set Active Profile dialog box. Note that 
the new profile is automatically calibrated to the last 
time calibration was run as it is created.

Select OK. Selecting OK before saving a profile 

causes ColorCal to prompt to save changes or cancel. 
The new profile is automatically calibrated to the last 
time calibration was run as it is created.

Select a color profile to edit from the color profile 

popup menu.

Select a color curve to edit from the floating 

CMYK color curve palette. If the Master curve is 
selected, the Edit Control Points button is disabled.

Select the Edit Control Points button.

To edit, drag the curve points with the mouse 

pointer. Output Percentage (0% to 100%) and Input 
Percentage (0% to 100%) update instantly on the right 
as a curve point is moved.

•

To add a curve point, click anywhere along the 

curve. ColorCal allows a maximum of 32 control 
points for an individual color curve.

•

To remove a curve point, drag it over another 

point on the color curve.

•

A single level of Undo is supported which 

removes the last change to a control point.

•

To undo all changes to the curve, click Revert.

Select Save to overwrite the existing profile or 

Save As… to create a new profile.

•

The Save option is disabled when factory profiles 

are selected because factory profiles are not editable.

•

When using Save As…, enter a profile name for 

the new profile and then click Save.

•

The new profile name appears in the list of color 

profiles in the Set Active Profile dialog box. Note that 
the new profile is automatically calibrated to the last 
time calibration was run as it is created.

Select OK. ColorCal prompts to save changes or 

cancel if OK is selected before saving a profile. Note 
that the new profile is automatically calibrated to the 
last time calibration was run as it is created.