Руководство По Установке для Xerox ColorQube 8870
Printer Attachment Kit
Kit Installation Instructions
PLEASE READ ALL
INSTRUCTIONS THOROUGHLY
Purpose
This kit is intended to provide the capability
to secure the ColorQube 8870 or 8880
printers to a table/desk top, such that it
cannot be easily moved.
Kit Contents
Item
Description
Qty
1
Instructions
1
2
Stability Brackets
2
3
Isopropyl Pad
1
4
Scotch Pad
1
5
Warning Labels
2
Procedure
Check off steps as they are completed:
1. Locate area where the Stability Bracket
will be installed. See picture below.
____
Recommended bracket install location for
right side
2. Using the enclosed Scotch Pad, lightly
rub the areas where both faces of the
Stability Bracket will attach. ____
3. Using the enclosed Isopropyl Pad,
thoroughly clean the area rubbed
with the Scotch Pad. Dry with a clean
cloth or wipe. ____
4. Remove the red backing on both faces
of the Stability Bracket. Carefully align
on the area where it is to attach and
press into place. Hold firmly in place for
30 seconds. See picture below. ____
NOTE: These Brackets will be
NOTE: These Brackets will be
PERMANENTLY attached to the
printer and the surface they are
being mounted to.
5. Proceed to next step. ____
6. Repeat steps 1-4, placing the second
Stability Bracket on
the FRONT left side of the printer. ____
7. Attach the enclosed Warning Labels,
one directly above each Stability
Bracket, as shown below. ____
607E00890f1 Rev A
www.xerox.com/office/support