Xerox ColorQube 8870 安装指南

Printer Attachment Kit

Kit Installation Instructions

Purpose

This kit is intended to provide the capability 

to secure the ColorQube 8870 or 8880 

printers to a table/desk top, such that it 

cannot be easily moved.

Kit Contents

1

Instructions

1

2

Stability Brackets

2

3

Isopropyl Pad

1

4

Scotch Pad

1

5

Warning Labels

2

Procedure

Check off steps as they are completed:

1.  Locate area where the Stability Bracket 

will be installed. See picture below.  

____

2.  Using the enclosed Scotch Pad, lightly 

rub the areas where both faces of the 

Stability Bracket will attach. ____

3.  Using the enclosed Isopropyl Pad, 

thoroughly clean the area rubbed  

with the Scotch Pad. Dry with a clean 

cloth or wipe. ____

4.  Remove the red backing on both faces 

of the Stability Bracket. Carefully align 

on the area where it is to attach and 

press into place. Hold firmly in place for 

30 seconds. See picture below.  ____
NOTE: These Brackets will be 

5.  Proceed to next step. ____

6.  Repeat steps 1-4, placing the second 

Stability Bracket on  

the FRONT left side of the printer. ____ 

7.  Attach the enclosed Warning Labels, 

one directly above each Stability 

Bracket, as shown below. ____

607E00890f1 Rev A