Инструкции По Установке для Honeywell Bypass Drum Humidifier (HE120A)

69-1110EF—02

6 

When leaving on vacation, turn off the humidifier water supply and your humidity 

control. Turn on the humidifier water supply and reset your humidity control when you 

return.

After winter startup or maintenance, use the following steps to check the humidifier 

operation:

1. Turn on the humidifier power and water supply.

2. Open By-Pass Damper (if installed).

3. Check the water level in the humidifier water pan; water level setting should be 

1-3/8 in. 

NOTE: Turn the valve adjustment screw, located on the water valve inside the

humidifier, clockwise to lower the water level and counter clockwise to raise it.

4. Turn the Humidity Control to the highest setting.

5. Check that the humidifier pad is rotating.

6. Reset the thermostat and Humidity Control to a comfortable setting.

Low humidity Furnace blower not 

operating.

• Reset circuit breaker or check for blown fuse.

• Check that the furnace power is on.

• Check all external wiring connections.

• Check the humidity control setting.

• Call a professional heating contractor.

Rapid air changes. 

Drafts (cold air is dry 

and is an added load 

to the humidifier).

• Keep doors and windows closed.

• Close fireplace damper when not in use.

• Keep exhaust fan running time to a 

minimum.

• Seal around doors and windows. 

High humidity Condensation on 

walls.

• Turn off the humidity control and water until 

condensation is completely evaporated.

Heavy condensation 

on windows.

• Turn humidity control down low enough to 

eliminate condensation caused by moisture 

from bathing, mopping, cooking, etc. If 

moisture persists, more ventilation is 

needed.