Справочник Пользователя для TP-LINK TL-WR 740 N
TL-WR740N/TL-WR741ND
150Mbps Wireless N Router
Target - In this filed, select a target from the drop-down list for the rule. The default value
is the
is the
Target Description you set just now.
Schedule - In this field, select a schedule from the drop-down list for the rule. The
default value is the
default value is the
Schedule Description you set just now.
Status - In this field, there are two options, Enable or Disable. Select Enable so that the
rule will take effect. Select
rule will take effect. Select
Disable so that the rule won't take effect.
5. Click
Finish to complete adding a new rule.
Method Two:
1. Click the
1. Click the
Add New… button and the next screen will pop up as shown in Figure 4-52.
2. Give a name (e.g. Rule_1) for the rule in the
Rule Name field.
3. Select a host from the
Host drop-down list or choose “Click Here To Add New Host List”.
4. Select a target from the
Target drop-sown list or choose “Click Here To Add New Target
List”.
5. Select a schedule from the
Schedule drop-down list or choose “Click Here To Add New
Schedule”.
6. In the
Status field, select Enabled or Disabled to enable or disable your entry.
7. Click the
Save button.
Figure 4-52 Add Internet Access Control Entry
For example: If you desire to allow the host with MAC address 00-11-22-33-44-AA to access
www.google.com only from 18:00 to 20:00 on Saturday and Sunday, and forbid other hosts in the
LAN to access the Internet, you should follow the settings below:
www.google.com only from 18:00 to 20:00 on Saturday and Sunday, and forbid other hosts in the
LAN to access the Internet, you should follow the settings below:
1. Click the submenu
Rule of Access Control in the left to return to the Rule List page. Select
Enable Internet Access Control and choose "Allow the packets specified by any enabled
access control policy to pass through the Router".
access control policy to pass through the Router".
2. We recommend that you click
Setup Wizard button to finish all the following settings.
3. Click the submenu
Host of Access Control in the left to enter the Host List page. Add a new
entry with the Host Description is Host_1 and MAC Address is 00-11-22-33-44-AA.
61