Руководство По Проектированию для Cisco Cisco Aironet 350 Mini-PCI Wireless LAN Client Adapter
8-4
Enterprise Mobility 4.1 Design Guide
OL-14435-01
Chapter 8 Cisco Wireless Mesh Networking
Introduction
The 1500 Series Mesh AP also has a 10/100 Ethernet connection to provide bridging functionality. This
Ethernet connection supports power over Ethernet (PoE) through a separate power injection system.
Ethernet connection supports power over Ethernet (PoE) through a separate power injection system.
Note
The power injector is unique for this product; other Cisco power injection solutions are not suitable for
use with the Cisco 1500 Series Mesh AP.
use with the Cisco 1500 Series Mesh AP.
The Cisco 1500 Series Mesh AP uses LWAPP to communicate to a wireless controller and other 1500
Series Mesh APs in the wireless mesh.
Series Mesh APs in the wireless mesh.
The 1500 Series Mesh AP is designed to be mounted upside-down with its antenna oriented vertically,
as shown in
as shown in
Figure 8-3
1500 Series Mesh AP Installation
Cisco Wireless LAN Controllers
The wireless mesh solution is supported by the Cisco 4400 Series Wireless LAN Controller (WLC)
(shown in
(shown in
) and the Cisco Wireless Services Module (WiSM) (shown in
). Either
platform is recommended for wireless mesh deployments because they can both scale to large numbers
of access points and can support both Layer 2 and Layer 3 LWAPP connections.
of access points and can support both Layer 2 and Layer 3 LWAPP connections.
Figure 8-4
Cisco 4400 Wireless LAN Controller