Руководство По Проектированию для Cisco Cisco Aironet 350 Mini-PCI Wireless LAN Client Adapter
10-48
Enterprise Mobility 4.1 Design Guide
OL-14435-01
Chapter 10 Cisco Unified Wireless Guest Access Services
Other Features and Solution Options
Note
If a pre-authentication ACL is used in conjunction with the web auth policy, it must include a rule to
permit DNS requests; otherwise, the client is unable to resolve and connect to a destination host/URL
that is otherwise allowed by the ACL.
permit DNS requests; otherwise, the client is unable to resolve and connect to a destination host/URL
that is otherwise allowed by the ACL.
Anchor Controller DHCP Configuration
If the anchor controller is going to manage DHCP services for the guest access WLAN, proceed with the
steps below.
steps below.
Note
The anchor controller cannot be used to manage DHCP services if guest N+1 redundancy is being
implemented, because there is no mechanism to synchronize address leases for a single guest
VLAN/subnet across two or more WLCs.
implemented, because there is no mechanism to synchronize address leases for a single guest
VLAN/subnet across two or more WLCs.
Adding a New DHCP Scope to the Anchor Controller
Step 1
Click the Controller tab.
Step 2
In the left pane, click Internal DHCP Server.
Step 3
Click New. (See
.)
Figure 10-59
Adding a New DHCP Scope
Defining a Scope Name
Step 4
Define a name for the scope and click Apply. (See
.)
Figure 10-60
Defining a Scope Name
Step 5
Click Scope Name to edit. (See