Руководство Пользователя для Cisco Cisco Content Security Management Appliance M160

To allow Cisco to better support and design future system changes, the Cisco Content Security appliance 
can be configured to send Cisco a copy of all alert messages generated by the system. This feature, called 
‘AutoSupport’, is a useful way to allow Customer Support to be proactive in supporting your needs. 
AutoSupport also sends weekly reports noting the uptime of the system, the output of the status 
command, and the AsyncOS version used.

By default, alert recipients set to receive Information severity level alerts for System alert types receive 
a copy of every message sent to Cisco. This can be disabled if you do not want to send the weekly alert 
messages internally. To enable or disable this feature, see 

.

The following tables list alerts by classification, including the alert name, description, and severity.

 contains a list of the various hardware alerts that AsyncOS can generate, including a 

description of the alert and the alert severity.

 contains a list of the various system alerts that AsyncOS can generate, including a description 

of the alert and the alert severity.

Sent when interface errors are detected.

Warning



Sent when a disk partition is nearing capacity 
(75%).

Warning



Sent when a disk partition reaches 90% capacity 
(and at 95%, 96%, 97%, and so on).

Critical



Sent when a critical RAID-event occurs.

Warning



Sent when a RAID-event occurs.

Information

Sent when there is an unknown application failure.

Critical

Sent when a feature key has expired.

Warning

Sent when a feature key is about to expire.

Warning



Sent as a final notice that a feature key is about to expire. Warning