Руководство По Установке для Cisco Cisco Email Security Appliance C170

This section describes the location and meaning of LEDs and buttons and includes the following topics

 shows the front panel LEDs. Although it shows eight hard drives, most models of the 

Cisco 380 and Cisco 680 series appliances support fewer hard drives. For information about the 
maximum number of hard drives that are supported for your model, see the 

 defines the LED states. 

 

1

P1

Indicates proxy port. Connect P1 to the network for both 
incoming and outgoing traffic.

2

P2

Indicates proxy port. When both P1 and P2 are enabled, you must 
connect P1 to the internal network and P2 to the Internet. P1 and 
P2 can connect to L4 switch, WCCP router, or network switch.

3

T1

Indicates traffic monitor port T1 for Duplex Ethernet tap: One 
cable for all incoming and outgoing traffic.

4

T2

Indicates traffic monitor port. Simplex Ethernet tap: Ports T1 and 
T2. One cable for all packets destined for the internet (T1), and 
one cable for all packets coming from the Internet (T2).