Примечания к выпуску для Cisco Cisco ONS 15454 SDH Multiservice Provisioning Platform (MSPP)

originate from the node whose active cross connect or active TCCi/2 will be removed (performing a 
lockout on all spans will also accomplish the same goal). No lockout is necessary for switches initiated 
through CTC. 

If you mistakenly remove an active cross connect or TCCi/2 card and you subsequently lose traffic 
on some interface cards, you may need to physically reset these cards if they fail to regain traffic.

A cross connect card switch can result in double traffic hits or a long hit for a E1-VC12 circuit. This 
issue is under investigation.

On the AIC-i card, a volume adjustment on the receive value of a four-wire orderwire circuit will be 
displayed as the negative of its actual value. To work around this issue, enter the negative of the value 
you actually want for the receive value. For example, adjust the receive value on CTC to -2 dbm for a 
gain of 2 dbm. This issue will be resolved in a future release.

Tables 1, 2, and 3 list the cards that are compatible for the ONS 15454 SONET and ONS 15454 SDH 
platforms. All other cards are platform specific.

15454E-G1000-4

4 port Gigabit Ethernet Module - need GBICs

15454E-E100T-12

12 port 10/100BT Ethernet Module

15454E-E1000-2

2 port Gigabit Ethernet Module - need GBICs

15454-G1000-4

4 Port Gigabit Ethernet

15454-E100T-G

10/100BT, 12 Circuit, compatible w/ XC, XCVT 
and XC-10G

15454-E1000-2-G

Gigabit Ethernet, 2 circuit., GBIC - G