Руководство По Установке для Cisco Cisco ONS 15454 SONET Multiservice Provisioning Platform (MSPP)
14
Installing and Operating UBIC-V EIAs in the Cisco ONS 15454
78-16140-04
Install the Tie-Down Bar (Optional)
Figure 10
Installing the UBIC-V EIA
Install the Tie-Down Bar (Optional)
This task installs the tie-down bar used to secure cabling on the rear of the ONS 15454. The tie-down
bar can be used to provide a diverse path for redundant power feeds and cables. You will need the
optional 5-inch tie-down bar, two accompanying screws, and a #2 Phillips screwdriver.
bar can be used to provide a diverse path for redundant power feeds and cables. You will need the
optional 5-inch tie-down bar, two accompanying screws, and a #2 Phillips screwdriver.
Note
As applicable according to local site practice, install the tie-down bar where the alarm and timing pins
can still be accessed.
can still be accessed.
Step 1
Align the ends of the tie-down bar with two screw holes in the appropriate location on the equipment
rack.
rack.
shows the tie-down bar, the ONS 15454, and the equipment rack.
115087