Руководство По Установке для Cisco Cisco ONS 15454 SDH Multiservice Provisioning Platform (MSPP)
8
Installing ONS 15454 SDH TCC-I Cards
78-14610-01
Removal Procedures
Note
To determine whether the TCC-I card is in active mode or standby mode, view it in the CTC software
and position the cursor over the TCC-I card graphic to display the status.
and position the cursor over the TCC-I card graphic to display the status.
Step 1
If you need to perform a card pull on an active TCC-I card, initiate a software reset on the active TCC-I
card first. (See the
card first. (See the
).
Step 2
When the TCC-I is in standby mode, unlatch the top and bottom ejector levers on the TCC-I card.
Step 3
Carefully remove the card from the shelf.
Initiate a Software Reset
Step 1
Log into the CTC software.
Step 2
Right-click the TCC-I card to reveal a pull-down menu.
Step 3
Click Reset Card. (See
).
Figure 4
Resetting from the TCC-I card pull-down menu
Step 4
Click Yes in the dialog box when the "Are You Sure?" prompt appears.
Step 5
Click OK in the dialog box when the "Lost connection to node, changing to Network View" prompt
appears.
appears.
Step 6
Confirm that the TCC-I card is in standby mode after the reset.