Руководство По Обслуживанию для Cisco Cisco StadiumVision Director
© 2011 Cisco Systems, Inc. All rights reserved.
Page 16 of 20
Viewing DMP and TV Settings
The Settings tab, shown in Figure 14 and defined in Table 4, displays basic
information about the DMP as well as information about the TV attributes, DMP
network settings, video settings, storage capacity, and firmware. There are nine
drawers on the Settings tab which display status useful for determining where a
DMP is connected. Select the Network drawer to display the General Settings and
Medianet Services panels. The Medianet Services panel shows you the switch IP
address, switch name, and switch port the DMP is connected to. This information is
especially helpful if you need to escalate an issue to the StadiumVision support
team.
information about the DMP as well as information about the TV attributes, DMP
network settings, video settings, storage capacity, and firmware. There are nine
drawers on the Settings tab which display status useful for determining where a
DMP is connected. Select the Network drawer to display the General Settings and
Medianet Services panels. The Medianet Services panel shows you the switch IP
address, switch name, and switch port the DMP is connected to. This information is
especially helpful if you need to escalate an issue to the StadiumVision support
team.
Figure 14. Settings Basic Tab
Table 4.
Settings Tab Drawers
Setting
Description
Basic Settings
Displays basic information about the DMP including the name, description, model name, product
ID and the startup URL. This information is assigned to the DMP when you add it to the
StadiumVision Director database.
ID and the startup URL. This information is assigned to the DMP when you add it to the
StadiumVision Director database.
Display Attributes
Displays settings for the TV display, volume, and display X/Y dimensions.
HDMI Display
Displays details about the TV such as the manufacturer, model number, version, connector type
and supported standards.
and supported standards.
Network
Displays network settings for the DMP.
Video
Not implemented.
NTP
Displays settings for the NTP service (if enabled). (DMP 4310 only)
Storage
Displays details about the total disk space and the free disk space.
Syslog
Indicates whether the Syslog is enabled and if so, the Syslog collector IP address.
Firmware
Displays information about the firmware and kernel running on the DMP.
Verifying the DMP Display Attributes
To verify that the DMP and the TV agree on the most optimal display settings:
1. On the Dashboard, select the Device Configuration drawer.