Примечания к выпуску для Cisco Cisco Network Assistant Version 4.0

When you install and launch Cisco Network Assistant 4.0, you can

Use the IP Addresses feature to assign an IP address to the integrated wireless LAN controller on the 
Catalyst 3750G-24WS-S25 and 3750G-24WS-S50 switches.

Access the command-line interface (CLI) through the Telnet feature. It is available on the feature bar and 
on device popup windows in the Topology view and Front Panel view.

Create communities with an unlimited number of access points.

Use colors to highlight VLAN links in the Topology view. This option is available only if you are 
managing a community. To access it, you open Topology Options window and use the Highlighting tab.

Print windows in a report format. In this format, none of the window information is truncated, as can 
happen if you use the PrtSc key to print the screen. The report format is also time-stamped, and pages 
are numbered.

Print the Topology view or the Front Panel view in a fit-to-page format.

Launch the device manager for devices in your network from device popup windows in the Topology 
view or Front Panel view.

Stop the process of discovering neighbors at any point when you create or modify a community.

Cisco Network Assistant 4.1 adds these features:

A graphical user interface and online help in additional languages: French, Spanish, Italian, German, 
Japanese, and simplified Chinese

Limited support for the Cisco Catalyst 4006 Chassis, WS-C4006

Support for Cisco 850 Series Integrated Services Routers and Cisco 870 Series Integrated Services 
Routers

The system requirements are described in these sections:

The PC on which you install Network Assistant must meet these minimum hardware requirements:

Processor speed: Pentium 3, 1 GHz

DRAM: 256 MB minimum, 512 MB recommended for better performance

Hard-disk space: 70 MB for the application alone, 200 MB recommended

Number of colors: 65536

Resolution: 1024 x 768

Font size: Small