Руководство По Установке для Cisco Cisco Prime Infrastructure 2.2
10
Step 6
When the application installation is complete, you will be prompted for the following post-installation parameters:
•
High Availability Role Selection—Enter yes at the prompt if you want this installed server to serve as the failback
secondary server in a high availability implementation. You will be prompted to provide an authentication key to
be used for high availability registration. If you enter no at the prompt, the server will act as the primary server
(standalone) and the installation will proceed with the following prompts:
secondary server in a high availability implementation. You will be prompted to provide an authentication key to
be used for high availability registration. If you enter no at the prompt, the server will act as the primary server
(standalone) and the installation will proceed with the following prompts:
•
Web Interface Root Password—Enter and confirm the password used for the default root administrator. This is the
account used to log in to the Prime Infrastructure web user interface for the first time and set up other user
accounts.
account used to log in to the Prime Infrastructure web user interface for the first time and set up other user
accounts.
•
Enabling FIPS Mode—Specify yes if you want to install Prime Infrastructure in a Federal Information Processing
Standards (FIPS) 140-2 compliant mode of operation (before selecting this option, be sure you have read and
understand the section
Standards (FIPS) 140-2 compliant mode of operation (before selecting this option, be sure you have read and
understand the section
).
Step 7
Select Yes to proceed with the installation, or select No to re-enter high availability and FIPS mode options.
Step 8
When the installation is complete, the appliance reboots and you are presented with a login prompt.
Step 9
Log in to the virtual machine using the “admin” username and password that you specified in Step 4.
Step 10
Run the ncs status command (see
in the
) to verify that the processes have restarted. You should see the following process statuses:
•
Non-FIPS (Standalone): All Processes are up and running.
•
FIPS (Standalone): FTP, TFTP, and PnP are disabled. Other processes are running.
•
Secondary server: Health Monitor Process is running. (This is the only process that should be running on the
secondary server.)
secondary server.)
4
Post-Installation Tasks
Follow the instructions in the topics belows once you have finished installing Prime Infrastructure.
•
•
•
Migrating Data From Previous Releases of Prime Infrastructure
To restore your data from Prime Infrastructure 1.4.x or 2.1.x to your newly installed Prime Infrastructure 2.2 server, follow
these steps:
these steps:
Note
If you are running multiple previous releases of Prime Infrastructure (for example, you are running version 1.4.x and
version 2.1.x), you must select one version from which to restore data. You cannot restore data from more than one
Prime Infrastructure version. See
version 2.1.x), you must select one version from which to restore data. You cannot restore data from more than one
Prime Infrastructure version. See
.
Step 1
Configure the new Prime Infrastructure host
to use the same remote backup repository as the old host. For details, see
in the Cisco Prime Infrastructure 2.2 Administrator Guide.
Step 2
Restore the application backup on the remote repository to the new host, as explained in
.