Руководство По Установке для Cisco Headend System Release 2.7
Stop the dhctStatus, signonCount, and cmd2000 Utilities
4023737 Rev C
41
Terminating the cmd2000 Utility
Complete the following steps to determine if any cmd2000 processes are running
and then to terminate them, if necessary.
1 If necessary, open an xterm window on the DNCS.
2 Type ps -ef | grep cmd2000 and press Enter. The system displays a list of
and then to terminate them, if necessary.
1 If necessary, open an xterm window on the DNCS.
2 Type ps -ef | grep cmd2000 and press Enter. The system displays a list of
cmd2000 processes.
3 Do the results from step 2 show any active cmd2000 processes?
If yes, choose one of the following options:
–
–
If you have a SA Application Server, type kill -9 <processID> and then
press Enter for any cmd2000 processes that may be running.
press Enter for any cmd2000 processes that may be running.
–
If you have an Aptiv Application Server, type
/pdt/bin/StopCmd2000Logging and then press Enter.
/pdt/bin/StopCmd2000Logging and then press Enter.
If no, go to Back Up and Delete the copyControlParams File (on page 44).
4 Type ps -ef | grep cmd2000 again and then press Enter to confirm that all
cmd2000 processes are stopped.
5 Do the results from step 4 show that there are cmd2000 processes that are still
running?
If yes, type kill -9 <processID> and then press Enter for any cmd2000
processes that may be running; then, repeat steps 4 and 5.
processes that may be running; then, repeat steps 4 and 5.
If no, go to Back Up and Delete the copyControlParams File (on page 44).