Примечания к выпуску для Cisco Cisco IOS Software Release 12.2(1)XF
8
Release Notes for the Cisco uBR10012 Universal Broadband Router for Cisco IOS Release 12.2 XF
78-12442-01 Rev.C0
New and Changed Information
New Software Feature in Release 12.2(1)XF
Cisco IOS Release 12.2(1)XF introduces software support for the Cisco uBR10012 router, as described
in the Cisco uBR10000 Series Universal Broadband Router Software Configuration Guide.
in the Cisco uBR10000 Series Universal Broadband Router Software Configuration Guide.
Current MIBs
To obtain lists of supported MIBs by platform and Cisco IOS release, and to download MIB modules,
go to the Cisco MIB web site on Cisco.com at
http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml.
go to the Cisco MIB web site on Cisco.com at
http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml.
Supported MIBs
The Cisco uBR10000 series universal broadband routers support the following categories of MIBs:
•
SNMP standard MIBs—These MIBs are required by any agent supporting SNMPv1 or SNMPv2
network management.
network management.
•
Cisco’s platform and network-layer enterprise MIBs—Common across most of Cisco’s router
platforms. If your network management applications are already configured to support other Cisco
routers, such as the 2600 series router, no further configuration is needed unless the version of
Cisco IOS software being used has updated these MIBs.
platforms. If your network management applications are already configured to support other Cisco
routers, such as the 2600 series router, no further configuration is needed unless the version of
Cisco IOS software being used has updated these MIBs.
•
Cable-specific MIBs—Provide information about the cable interfaces and related information on the
uBR10000 series routers. They include both DOCSIS-specific MIBs and Cisco-specific enterprise
MIBs. If your network management applications have not already been configured for the
Cisco uBR10012 routers, these MIBs must be loaded.
uBR10000 series routers. They include both DOCSIS-specific MIBs and Cisco-specific enterprise
MIBs. If your network management applications have not already been configured for the
Cisco uBR10012 routers, these MIBs must be loaded.
•
Deprecated MIBs—Supported in earlier releases of Cisco IOS software but have been replaced by
more standardized, scalable MIBs. Network Management applications and scripts should convert to
the replacement MIBs as soon as possible.
more standardized, scalable MIBs. Network Management applications and scripts should convert to
the replacement MIBs as soon as possible.
•
CISCO-ENTITY-VENDORTYPE-OID-MIB
The cable-specific MIBs are described in the following section. For information on the SNMP standard
MIBs and Cisco’s platform and network-layer enterprise MIBs, see Cisco’s MIB web site at
http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml.
MIBs and Cisco’s platform and network-layer enterprise MIBs, see Cisco’s MIB web site at
http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml.
Cable-Specific MIBs
shows the cable-specific MIBs that are supported on the Cisco uBR10000 series universal
broadband routers. The table also provides a brief description of each MIB’s contents and the Cisco IOS
Software Release in which the MIB was initially functional—earlier releases might have had
unsupported prototype versions of the MIB; later releases might have added new attributes and
functionality. Because of interdependencies, the MIBs must be loaded in the order given in the table.
Software Release in which the MIB was initially functional—earlier releases might have had
unsupported prototype versions of the MIB; later releases might have added new attributes and
functionality. Because of interdependencies, the MIBs must be loaded in the order given in the table.