Примечания к выпуску для Cisco Cisco MDS 9000 NX-OS Software Release 5.0

Cisco MDS 9000 switch, the device in the native VSAN should be configured with a persistent FCID. 
Assuming the FCID is 0xAABBCC, AA should be configured with the virtual IVR domain ID of the 
VSAN that contains the ISLs and BB should be configured in the following range:

1 through 64 if the Brocade switch is operating in native interop mode.

1 through 30 if the Brocade switch is operating in McData Fabric mode or McData Open Fabric 
Mode.

This configuration ensures that the devices connected to the Cisco MDS 9000 switch can be seen in the 
name server database on the Brocade switch.

This section lists the open and resolved caveats for this release. Use 

 to determine the status of a 

particular caveat. In the table, “O” indicates an open caveat and “R” indicates a resolved caveat.

CSCto68011

Symptom: The fcdomain service on both supervisor modules fails, which results in a reload of the 
device. An error message similar to the following is displayed: 

'' %SYSMGR-2-SERVICE_CRASHED: Service ''fcdomain'' (PID 4688) hasn't caught signal 11 

(core will be saved)'' 

This issue affects the following products when they have SNMP configured:

Cisco MDS 9000 Series Multilayer switches 

Cisco Nexus 5000 Series switches and Cisco Nexus 2000 Series, running in FC switching mode 
(NPV mode is not affected).

The following products are confirmed not vulnerable:

Cisco Nexus 7000 Series switches

Cisco Nexus 4000 Series switches

Workaround: The following workaround is available:

O

O

O

O

O

O