для Cisco Cisco ACE Application Control Engine Module
Americas Headquarters:
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco CSM-to-ACE Conversion Tool User Guide
This document describes how to use the CSM-to-ACE conversion tool to migrate Cisco Content
Switching Module (CSM) running- or startup-configuration files to the Cisco Application Control
Engine (ACE) module. It describes how to access the conversion tool, use the tool to convert a CSM
configuration to an ACE configuration, and copy the converted configuration to the ACE. This document
also includes a summary of the CSM commands that are not supported by the conversion tool.
Switching Module (CSM) running- or startup-configuration files to the Cisco Application Control
Engine (ACE) module. It describes how to access the conversion tool, use the tool to convert a CSM
configuration to an ACE configuration, and copy the converted configuration to the ACE. This document
also includes a summary of the CSM commands that are not supported by the conversion tool.
This document contains the following sections.
•
•
•
•
•
•
Accessing the CSM-to-ACE Conversion Tool
The conversion tool is included as part of the ACE software image and is accessible from the Cisco ACE
Module web page using either HTTP or secure HTTP (HTTPS). To access the conversion tool, perform
the following steps:
Module web page using either HTTP or secure HTTP (HTTPS). To access the conversion tool, perform
the following steps:
Step 1
Log in to the ACE CLI.
Step 2
Create a Layer 3 and Layer 4 management policy. Ensure that, at a minimum, you permit HTTP or
HTTPS traffic in the management policy to enable remote access to the Cisco ACE Module web page.
The following excerpt is a typical configuration example that illustrates how to enable web access to the
ACE to access the Cisco ACE Module web page. For details on enabling remote access to the ACE, refer
to the Cisco Application Control Engine Module Administration Guide.
HTTPS traffic in the management policy to enable remote access to the Cisco ACE Module web page.
The following excerpt is a typical configuration example that illustrates how to enable web access to the
ACE to access the Cisco ACE Module web page. For details on enabling remote access to the ACE, refer
to the Cisco Application Control Engine Module Administration Guide.
Cat6k Configuration
svclc multiple-vlan-interfaces
svclc module 3 vlan-group 1
svclc vlan-group 1 10