Cisco Cisco ACE Application Control Engine Module

© 2008 Cisco Systems, Inc. All rights reserved.

This document describes how to use the CSM-to-ACE conversion tool to migrate Cisco Content 
Switching Module (CSM) running- or startup-configuration files to the Cisco Application Control 
Engine (ACE) module. It describes how to access the conversion tool, use the tool to convert a CSM 
configuration to an ACE configuration, and copy the converted configuration to the ACE. This document 
also includes a summary of the CSM commands that are not supported by the conversion tool. 

This document contains the following sections.

The conversion tool is included as part of the ACE software image and is accessible from the Cisco ACE 
Module web page using either HTTP or secure HTTP (HTTPS). To access the conversion tool, perform 
the following steps:

Log in to the ACE CLI. 

Create a Layer 3 and Layer 4 management policy. Ensure that, at a minimum, you permit HTTP or 
HTTPS traffic in the management policy to enable remote access to the Cisco ACE Module web page. 
The following excerpt is a typical configuration example that illustrates how to enable web access to the 
ACE to access the Cisco ACE Module web page. For details on enabling remote access to the ACE, refer 
to the Cisco Application Control Engine Module Administration Guide.

svclc multiple-vlan-interfaces

svclc module 3 vlan-group 1

svclc vlan-group 1  10