для Cisco Cisco 1900 2900 3900 Series 4-Port Gigabit Ethernet HS-WIC with PoE

Скачать
Страница из 135
Configuring Cisco EHWIC and 880G for 3G (EV-DO Rev A)
  Overview of the EHWIC-3G-EVDO Cards
12
Configuring Cisco EHWIC-3G-EVDO-x
OL-24266-03
 describes the functions of the LEDs of EHWIC-3G-EVDO. The LEDs provide a visual 
indication of your available services.
For information on how to install the EHWIC-3G-EVDO-x card in supported Cisco Access Routers, see 
For information on how to connect the EHWIC-3G-EVDO-x card to your network, see 
Table 2
EHWIC-3G-EVDO LED Description
LED
Description
WWAN LED
Modem status and 
data transmission
Off: EHWIC in reset mode or not powered.
Slow Green Blink: Searching for service.
Solid Green: Active service; no traffic detected.
Fast Green Blink: Active service. Detected traffic is proportional to blink rate.
RSSI LED
Received Signal 
Strength Indicator
Off: Low RSSI (under -100 dBm).
Slow Green Blink: Low or medium RSSI (-99 to -90 dBm).
Fast Green Blink: Medium RSSI (-89 to -70 dBm).
Solid Green: High RSSI (-69 dBm or higher).
Solid Yellow: No service or no RSSI detected.
EVDO LED
3G-EVDO Service 
Indicator
Off: 1xRTT Service
Green Blink: 1xEVDO Rev 0 Service
Solid Green: 1xEVDO Rev A Service
GPS LED
GPS Acquisition
Off: Searching for signal or Disabled.
Solid Green: Signal found.