для Cisco Cisco 1900 2900 3900 Series 4-Port Gigabit Ethernet HS-WIC with PoE
Configuring Cisco EHWIC and 880G for 3.7G (HSPA+)/3.5G (HSPA)
Configuring Cisco EHWIC and 880G for 3.7G (HSPA+)/3.5G (HSPA)
48
Configuring Cisco EHWIC-3G-HSPA-U
OL-24265-03
Configuring 3G
Note
The procedure to configure 3G on both modular and fixed Cisco ISRs is the same except for slot
numbering.
For example, for 3G HWICs, the numbering for slot 0, wic 0, and port 0 would be 0/0/0 for all
commands. For a fixed Cisco ISR, it would be only 0.
Please refer to platform-specific documentation for details on slot numbering.
numbering.
For example, for 3G HWICs, the numbering for slot 0, wic 0, and port 0 would be 0/0/0 for all
commands. For a fixed Cisco ISR, it would be only 0.
Please refer to platform-specific documentation for details on slot numbering.
To configure the 3G features, follow these procedures:
•
•
•
Data Account Provisioning
Note
To provision your modem, you must have an active wireless account with a service provider and a SIM
card installed in your 3G EHWIC.
card installed in your 3G EHWIC.
To provision your data account, follow these procedures:
•
•
Verifying Signal Strength and Service Availability
To verify the signal strength and service availability on your modem, use the following commands in the
privileged EXEC mode.
privileged EXEC mode.
SUMMARY STEPS
1.
show cellular unit network
2.
show cellular unit radio
3.
show cellular unit profile
4.
show cellular unit security
5.
show cellular unit all