Техническая Спецификация для Cisco Cisco UCS C460 M4 Rack Server

The base server motherboard comes with an integrated SATA RAID 0/1 controller, which supports 
up to four SATA drives only (SAS drives are not supported). Therefore, a controller is not 
required when ordering SATA drives and a RAID 0 or 1 configuration is desired.

You can use the built-in SATA RAID 0/1 controller or you can also choose to implement other RAID 
configurations by using optional plug-in PCIe cards or an optional mezzanine board on the server 
motherboard.

Cisco can provide factory-configured RAID 0, 1, 1E, 5, 6, and 10 systems depending on the RAID 
card chosen and the number of drives ordered. Factory-configured RAID options are listed with 
each RAID card description. Note that RAID levels 50 and 60 are supported on the 9280-4i4e and 
9260-8i, but are not factory configurable.

Select one RAID controller, one RAID configuration option, and, if desired, a battery backup 
option listed in 

UCSC-RAID-C-4I4E

LSI MegaRAID SAS 9280-4i4e, four internal and four external ports

■

Takes up one of two available PCIe slots

■

Supports up to four internal SAS or SATA drives (no mixing)

■

Supports external JBOD expansion

■

Battery backup option available (see the RAID Battery Backup PID section 

later in this table)

■

Factory-configured RAID options: RAID 0, 1, 5, 6, 10, 50, and 60 supported 

(see the RAID PIDs section in this table for factory configurable options)

RC460-PL001

LSI MegaRAID SAS 9260-8i (RAID 0, 1, 5, 6, 10)

■

Takes up one of two available PCIe slots

■

Supports up to eight SAS and/or SATA drives

■

Includes 512 MB of write cache

■

Battery backup option available (see the RAID Battery Backup PID section 

later in this table)

■

Factory-configured RAID options: RAID 0, 1, 5, 6, 10, 50, and 60 supported 

(see the RAID PIDs section in this table for factory configurable options)