Техническая Спецификация для Cisco Cisco UCS C24 M3 Rack Server

■

ROM1 and ROM15 embedded RAID upgrade options each support up to 4 drives.

■

The LSI MegaRAID SAS 9270CV-8i, 9240-8i, and 9220-4i RAID controller cards each support up 
to 4 drives

See 

 for a summary of the supported RAID configuration options.

NOTE:  If you do not select a PCIe RAID controller or one of the embedded RAID 
upgrade options (ROM1 or ROM15), you will have an embedded SATA-only RAID 
controller that supports up to four SATA-only drives (RAID 0, 1, 10).

1. If you want to boot from a device other than the 9270CV-8i, 9240-8i, or 9220-4i MegaRAID PCIe cards, you can 

leave the cards installed. Just disable the OPROM for their slots, and the system will boot even with the cards 
installed.

2. This server does not support dual RAID controllers.

3. A = available slot, O = occupied slot, U = unsupported slot (slot 2 is not supported in 1-CPU systems)

C22 M3 LFF

1

Not allowed

4. The OPROM is enabled for the default PCIe RAID controller slots. If you want to enable a different slot, you 

must go into the BIOS and enable the OPROM for the desired slot and disable the OPROM for the default PCIe 
slot (see 

Not allowed

4 internal

O

U

1

Not allowed

Not allowed

4 internal

A

U

C22 M3 LFF

2

Not allowed

Not allowed

4 internal

A

O

2

Not allowed

Not allowed

4 internal

A

A