Руководство По Установке для Cisco Cisco TelePresence MX700
D14639.05 Video Systems Getting Started Guide (TC5.0) | 2011 NOVEMBER | © 2011 Cisco Systems, Inc. All rights reserved.
www.cisco.com
17
GettinG started Guide
touch controller
Setting date, time and location
(when not set by a provisioning system)
When setting up your video conference system, you
should check that the date and time settings are correct.
Among other things this information is used to time stamp
messages transmitted to gatekeepers and other network
elements.
The time is shown in the top right corner of the Touch
controller display.
1. Tap
More > Settings > Administrator settings > Date,
Time & Location
.
2. Tap
24h
or
12h
to select the
Time Format
you prefer.
3. Tap
dd.mm.yy
,
mm.dd.yy
or
yy.mm.dd
to select the
Date
Format
you prefer.
4. Select the
Time Zone
your system is in. Step through the
list of available zones by tapping the - or + signs.
5. Set
Date & Time Mode
to
Auto
if you want time and date
to be regularly updated; otherwise, select
Manual
.
If you select
Manual
, enter the correct value for
Hour
,
Minute
,
Year
,
Month
, and
Day
. Tap the plus and minus
signs to increase or decrease a value.
If you select
If you select
Auto
, the NTP server address can be
automatically obtained from the network (set the
NTP
Mode
to
Auto
) or you can enter the
NTP Server
address
yourself (set
NTP Mode
to
Manual
).
6. Tap
Save
to save the changes, or
Undo
to leave without
saving.
7. Tap
Exit
to return to the home menu.
Back to task overview
User interfaces
Introduction
Configuration
Table of contents
Appendices
Configuration