Руководство По Обслуживанию для Cisco Cisco TelePresence MX700
Adding a new phone (endpoint) continued...
Device information
MAC Address:
Enter the TelePresence endpoints
MAC Address
.
Format: XXXXXXXXXXXX, 12-character, hexadecimal
Device Pool:
Choose a Device Pool.
Phone Button Template:
Choose a Phone Button Template.
If the TelePresence endpoint is connected to CUCM by
Expressway, the following fields are mandatory:
Owner:
Choose
User
to define that it is a personal endpoint.
Owner User ID:
Enter the User ID of the appropriate user. Refer to the
for details about CUCM user
management.
Protocol-specific information
Device Security Profile:
If using a non-secure communication, choose the
default
non-secure phone security profile
for your
product. If using a secure (encrypted) communication,
choose the
phone security profile
you previously
defined.
SIP Profile:
Choose the SIP Profile you previously defined.
Certification authority proxy function
Only applicable when:
1. Registering an endpoint for the first time; and
the endpoint is configured for secure (encrypted)
communication.
2. Registering an endpoint after it has been factory reset;
and the endpoint is configured for secure (encrypted)
communication.
3. TelePresence endpoints are not connected to CUCM by
Expressway.
Certificate Operation:
If using a secure profile, set to
Install/Upgrade
. Only
required the first time the endpoint is registering. After
the certificate has been downloaded to the endpoint,
this setting will automatically resume to
No pending
Operation
.
Authentication Mode:
Choose the appropriate value from the drop-down.
By Null String:
The Certificate Authority Proxy
Function (CAPF) process starts automatically.
By Authentication String:
The CAPF process starts
when the correct authentication code is received
from the endpoint.
By Existing Certificate (precedence to LSC/MIC):
This option can only be used when a Locally
Significant Certificate (LSC) is already stored on the
endpoint. In other words, it cannot be used the first
time the CAPF process runs.
Key-size:
Choose the appropriate value from the drop-down. The
recommended key size is 1024.
Cisco TelePresence Endpoints and Cisco Unified Communications Manager
Deployment Guide
D15336.01 Deployment gude for TelePresence Endpoints on CUCM, DECEMBER 2015.
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
14
Contents
Introduction
CUCM configuration
Endpoint configuration
Appendices
Contact
CUCM configuration