Руководство По Обслуживанию для Cisco Cisco TelePresence MX700
Adding a new phone (endpoint) continued...
Product-specific configuration layout
Navigate to the
Product Specific Configuration Layout
section and configure the settings described on the
following pages.
If registered to TMS (Cisco TelePresence Management
Suite) or CTSMAN (Cisco TelePresence Manager), configure
the product-specific configuration layout as appropriate.
NOTE: TMS supports Alternate phone book feature from
software release 14.4.
NOTE: CUCM will have support for Alternate phone book
feature in a device package which will be released sometime
after TC7.
Room Name (from Exchange(R)):
The Exchange Conference Room Name is used for
scheduling meetings where this TelePresence system
participates. This setting must match the email address
used in Exchange exactly. Example: room1@example.com.
Default value is <empty> and maximum length is 64
characters.
Web Access:
Enable or disable whether the device accepts
connections from a web browser or other HTTP clients.
Disabling the web server functionality of the device
blocks access to the TelePresence system's web
interface
and certain support capabilities, but do not
degrade normal operation. Default value is
Disabled
.
NOTE:
For the Web Access configuration change to take
effect, please make sure to
Save
and
RESET
the device
(
do not use
Restart or Apply Config).
SSH Access:
This parameter indicates whether the device accepts
SSH connections. Disabling the SSH server functionality
of the device blocks certain support capabilities such as
log file collection, but do not degrade normal operation.
Default value is
Disabled
.
Default Call Protocol:
This parameter sets the default call protocol of the
device. This device only supports SIP when registering
to CUCM. Default value is SIP.
Quality Improvement Server:
Specify a host name or IP address of a remote system
to collect quality improvement reports from the device.
Default value is ““ (empty) and maximum length is 256
characters.
Multipoint Mode:
Endpoints that do not have a bulit-in MultiSite feature
can use the ad hoc conference bridge on CUCM.
• Choose
Use Endpoint
to use the
built-in MultiSite
feature.
NOTE:
Applies to endpoints with MultiSite capability
and the option key installed.
• Choose
Use Media Resource Group List
to use the
Conference Bridge (media resources) feature on
CUCM. This will enable the ad hoc conferencing
feature and applies to non-MultiSite endpoints.
Telnet Access:
Set the network services Telnet mode (On/Off). Default
value is On.
Microphone Unmute On Disconnect:
Set the microphone mute mode (On/Off) to determine
whether the microphones are unmuted automatically
when calls are disconnected. Default value is On.
•
•
Off:
If muted during a call, let the microphones
remain muted after the call is disconnected.
•
On:
Unmute the microphones after the call is
disconnected.
Call Logging Mode:
Set the call logging mode (On/Off) for calls that are
received or placed by the system. Default value is On.
OSD Encryption Indicator:
Define how long the encryption indicator (a padlock) is
shown on screen (Auto/AlwaysOn/AlwaysOff). Default
value is Auto.
The setting applies to both encrypted and non-
encrypted calls, i.e. both to secure and non-secure
conferences.
Alternate phone book server type:
By default the endpoint uses the UDS server on the
UCM it is registered to, but if you wish to use an
alternate phone book server, this parameter combined
with an alternate phone book address overrides the
default setting of the endpoint.
• Set to TMS, if using the phone book from the Cisco
TelePresence Management Server.
• Set to UDS, if using the directory from the User Data
Service in CUCM.
Alternate phone book server address:
Enter the address to the phone book server. The field
requires a full URL.
• Example with UDS:
• Example with UDS:
https://uds-host-name:8443/cucm-uds/users.
• Example with TMS:
https://tms-host-name/tms/public/external/
phonebook/phonebookservice.asmx.
Cisco TelePresence Endpoints and Cisco Unified Communications Manager
Deployment Guide
D15336.01 Deployment gude for TelePresence Endpoints on CUCM, DECEMBER 2015.
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
16
Contents
Introduction
CUCM configuration
Endpoint configuration
Appendices
Contact
CUCM configuration