Руководство По Обслуживанию для Cisco Cisco TelePresence MX700

D15331.02 MX700 and MX800 Administrator Guide CE8.1, APRIL 2016.

152

Cisco TelePresence MX700 and MX800

Administrator Guide

Video Input Connector [1..4] RGBQuantizationRange

The devices connected to the video input should follow the rules for RGB video quantization

range defined in CEA-861. Unfortunately some devices do not follow the standard and this

configuration may be used to override the settings to get a perfect image with any source.

Requires user role: ADMIN
Default value: Connector 1, 2, 3: Auto Connector 4: Full

Value space: Auto/Full/Limited

Auto: RGB quantization range is automatically selected based on video format according

to CEA-861-E. CE video formats will use limited quantization range levels. IT video

formats will use full quantization range levels.
Full: Full quantization range. The R, G, B quantization range includes all code values (0 -

255). This is defined in CEA-861-E.
Limited: Limited Quantization Range. R, G, B quantization range that excludes some code

values at the extremes (16 - 235). This is defined in CEA-861-E.

Video Input Connector [1..5] Visibility

Define the visibility of the video input connector in the menus on the user interface.

Requires user role: ADMIN
Default value: Connector 1, 2, 3: IfSignal Connector 4: Always Connector 5: Never

Value space: Never/Always/IfSignal

Never: When the input source is not expected to be used as a presentation source, set

to Never.
Always: When set to Always, the menu selection for the video input connector will

always be visible on the graphical user interface.
IfSignal: When set to IfSignal, the menu selection for the video input connector will only

be visible when something is connected to the video input.

Video Monitors

A role is assigned to each monitor using the Video Output Connector [n] MonitorRole

setting. The monitor role decides which layout (call participants and presentation) will

appear on the monitor that is connected to this output. Monitors with the same monitor role

will get the same layout; monitors with different monitor roles will have different layouts.
The monitor layout mode that is set in the Video Monitors setting should reflect the number

of different layouts you want in your room setup. Note that some monitors can be reserved

for presentations.

Requires user role: ADMIN
Default value: Auto

Value space: Auto/Single/Dual/DualPresentationOnly/TriplePresentationOnly/Triple

Auto: The number of monitors connected to the codec is automatically detected, and the

layout is distributed on the monitors according to the MonitorRole settings.
Single: The same layout is shown on all monitors.
Dual: The layout is distributed on monitors with monitor role First and Second. If a

presentation is part of the layout, all participants in the call are shown on monitors with

monitor role First, and the presentation is shown on monitors with monitor role Second.
DualPresentationOnly: All participants in the call are shown on monitors with monitor role

First. If a presentation is part of the layout, the presentation is shown on monitors with

monitor role Second.
Triple: The layout is distributed on monitors with monitor role First, Second and Third.

If a presentation is part of the layout, all participants in the call are shown on monitors

with monitor role First and Second, and the presentation is shown on the monitor with

monitor role Third.
TriplePresentationOnly: All participants in the call are distributed on monitors with

monitor role First and Second. If a presentation is part of the layout, the presentation is

shown on the monitor with monitor role Third.

Introduction

Configuration

Peripherals

Maintenance

System settings

Appendices



System settings